Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
intro_cmos [2026/08/11 09:49] – [Potential well] xhoana.likmeta.extintro_cmos [2026/09/22 14:18] (current) – [Front side illmunation (FSI) and Bask side illumination (BI)] antoine
Line 68: Line 68:
 <figure center |N-Well finished structure> <figure center |N-Well finished structure>
 {{{{:nwellfinishedstructure.png?400|}} {{{{:nwellfinishedstructure.png?400|}}
-<caption>N-Well Finished structure</caption>+<caption>N-Well finished structure [(N-Well> [[https://link.springer.com/chapter/10.1007/978-3-030-79827-7_1 |Lilak, A.D., Keys, P.H. (2023).  CMOS Manufacturing Processes. In: Rudan, M., Brunetti, R., Reggiani, S. (eds) Springer Handbook of Semiconductor Devices.]])] </caption>
 </figure> </figure>
  
Line 79: Line 79:
 <figure center |P-Well finished structure> <figure center |P-Well finished structure>
 {{{:pwellfinishedstructure.png?400|}} {{{:pwellfinishedstructure.png?400|}}
-<caption>P-Well Finished structure</caption>+<caption>P-Well Finished structure [(P-Well> [[https://link.springer.com/chapter/10.1007/978-3-030-79827-7_1 |Lilak, A.D., Keys, P.H. (2023).  CMOS Manufacturing Processes. In: Rudan, M., Brunetti, R., Reggiani, S. (eds) Springer Handbook of Semiconductor Devices.]])] </caption>
 </figure> </figure>
  
Line 121: Line 121:
 <caption> Three CMOS pixel architectures  [(A Review of Optical Sensors in CMOS)]</caption> <caption> Three CMOS pixel architectures  [(A Review of Optical Sensors in CMOS)]</caption>
 </figure> </figure>
-==== Passive pixel sensor (PPS)==== +==== Passive pixel sensor (PPS)=== 
- +//Passive Pixel Sensor (PPS)// is a basic CMOS image sensor pixel architecture. Is an early type of digital image sensor. Each pixel uses a photodiode and a single transistor switch to transfer charges without in-pixel amplification. 
-**Passive Pixel Sensor (PPS)** is a basic CMOS image sensor pixel architecture. Is an early type of digital image sensor. Each pixel uses a photodiode and a single transistor switch to transfer charges without in-pixel amplification. +
 ==== Active pixel sensor (APS)  ==== ==== Active pixel sensor (APS)  ====
-**Active Pixel Sensor (APS):** Each pixel includes active components, typically an amplifier, enabling local charge-to-voltage conversion and multiplexed readout+//Active Pixel Sensor (APS)//:Each pixel includes active components, typically an amplifier, enabling local charge-to-voltage conversion and multiplexed readout
  
-**3T-APS: ** pixel normally contains a photodiode and three transistors: a reset transistor, a source-follower amplifier, and a row/pixel selection transistor.+//3T-APS//: pixel normally contains a photodiode and three transistors: a reset transistor, a source-follower amplifier, and a row/pixel selection transistor.
 It operates through three phases  It operates through three phases 
 1. Reset transistor  1. Reset transistor 
Line 134: Line 133:
 4. Photodiode as the light-sensitive element  4. Photodiode as the light-sensitive element 
  
-**4T-APS** adds a transfer gate and uses a pinned (buried) photodiode instead of a basic p-n junction photodiode.+//4T-APS// adds a transfer gate and uses a pinned (buried) photodiode instead of a basic p-n junction photodiode.
 adds one extra transistor compared with 3T APS: adds one extra transistor compared with 3T APS:
 1. Reset transistor  1. Reset transistor 
Line 149: Line 148:
 </figure> </figure>
 ====  Digital pixel sensor (DPS) ==== ====  Digital pixel sensor (DPS) ====
- +//Digital Pixel Sensor (DPS)// is a CMOS pixel architecture in which analog-to-digital conversion is performed at the pixel level. 
-Digital Pixel Sensor (DPS) is a CMOS pixel architecture in which analog-to-digital conversion is performed at the pixel level. +
 Each pixel contains a dedicated analog-to-digital converter controlled by reset and select signals. Instead of sending an analog voltage to column circuitry for later conversion, each pixel outputs a digital signal.  Each pixel contains a dedicated analog-to-digital converter controlled by reset and select signals. Instead of sending an analog voltage to column circuitry for later conversion, each pixel outputs a digital signal. 
 ===== Types of illumination ===== ===== Types of illumination =====
  
-==== Front side illmunation (FSI) and Bask side illumination (BI) ====+==== Front side illmunation (FSI) and Back side illumination (BI) ====
 More for early sensors [(Advances_on_CMOS)] More for early sensors [(Advances_on_CMOS)]
 Since its invention in 1993, CMOS image technology has evolved. The first architectures were front-illuminated, meaning the microlens and color filter were on top, followed by metal wiring for interconnects and the photodiode on the bottom. Since light enters the image sensor through the metal layers, some light information is reflected and lost before reaching the photodiode. This affected the performance of front-illuminated sensors, but Sony Corporation solved the problem by moving the photodiode to the top, next to the color filter. This architecture is known as the back-illuminated (BI) CMOS image sensor, which greatly improved the sensor’s performance.  Since its invention in 1993, CMOS image technology has evolved. The first architectures were front-illuminated, meaning the microlens and color filter were on top, followed by metal wiring for interconnects and the photodiode on the bottom. Since light enters the image sensor through the metal layers, some light information is reflected and lost before reaching the photodiode. This affected the performance of front-illuminated sensors, but Sony Corporation solved the problem by moving the photodiode to the top, next to the color filter. This architecture is known as the back-illuminated (BI) CMOS image sensor, which greatly improved the sensor’s performance. 
Line 175: Line 173:
  
 //In the most common **Bayer pattern**, the filters are arranged as (RGGB)  //red, green, green, and blue in a 2 × 2 unit//. In each color “pixel” consists of a 2-by-2 array of photo-detectors where two are designated to green channel and each of the other two are for the blue  //In the most common **Bayer pattern**, the filters are arranged as (RGGB)  //red, green, green, and blue in a 2 × 2 unit//. In each color “pixel” consists of a 2-by-2 array of photo-detectors where two are designated to green channel and each of the other two are for the blue 
-and red channels, as shown in figure 4.+and red channels.
  
 <figure center |color_pattern> <figure center |color_pattern>
Line 184: Line 182:
  
 <figure center | RGB CFA layouts> <figure center | RGB CFA layouts>
-{{ ::{{:doc2_page-0001.jpg?600|}} |https://www.researchgate.net/publication/3181278_Color_filter_arrays_design_and_performance_analysis}} +{{ ::{{:doc2_page-0001.jpg?600|}}  
-<caption> Different color patterns [(Color Filter Arrays: Design and Performance Analysis)] </caption>+<caption> Layout of color patterns [(Color Filter Arrays: Design and Performance Analysis)] </caption>
 </figure> </figure>