Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
life_cycle_analysis [2026/05/19 17:24] – [Parametric Life Cycle Analysis] antoinelife_cycle_analysis [2026/05/19 17:55] (current) – [Methodology for components] antoine
Line 32: Line 32:
   * **Supporting decision-making**, by delivering relevant environmental insights more efficiently   * **Supporting decision-making**, by delivering relevant environmental insights more efficiently
 ===== LCA for Naknow ===== ===== LCA for Naknow =====
 +
 +====  Methodology for components ====
 +
 +Naknow studies 5 components :
 +  * [[intro_wafer|Wafers]]
 +  * [[intro_pcb|PCB]]
 +  * [[intro_screen|Screens]]
 +  * [[intro_hdd|HDD disks]]
 +  * [[intro_optical_sensor|Optical sensors]]
 +
 +
 +
 +**Fonctional unit** : 1 component, during the whole lifespan.
 +
 +**System boundaries** : Specific to each model.
 +
 +**Approach**: //A digital equipment is considered a sum of components (mechanical, electronics, etc.), following a bottom-up approach. Hence, an equipement is broken down into components. The environmental impacts of each component are assessed and then summed to obtain the total impacts of the device.//
 +
 +
 +Each category of component is defined by one parametric model. For each specific piece of equipment (Laptop X from manufacturer Y), the corresponding model is ‘fed’ with the technical specifications of the equipment to be assessed. Commercial references are also available to prefill the technical specifications of the equipment.
 +
 +The following approach is applied for the different life cycle stages:
 +
 +=== Manufacturing ===
 +
 +^ **How it works** ^ **Types of parameters** ^ **Types of sources** ^
 +| - Breakdown of the equipment into components \\ - Parametric modelling of the environmental impacts of each component \\ - Sum of the impacts of each component | Mass or surface area of material, type of material \\ Technical configuration of equipment (CPU/GPU model, amount of RAM/storage, screen size, etc.) | Scientific literature \\ Benchmarks carried out on samples of marketed equipment \\ Databases \\ Own research |
 +
 +=== Distribution ===
 +
 +^ **How it works** ^ **Types of parameters** ^ **Types of sources** ^
 +| - Definition of a typical transport profile for each equipment category (using aeroplane, ship, train, truck) | - Weight of equipment \\ - Distance covered \\ - Type of transport | - Scientific literature \\ - LCA and public reports \\ - Databases |
 +
 +=== Use ===
 +
 +^ **How it works** ^ **Types of parameters** ^ **Types of sources** ^
 +| - Default average consumption value estimated from the technical specifications of the equipment | - Load rate \\ - Duration of use \\ - Country of use | - Scientific literature \\ - LCA and public reports \\ - Databases |
 +
 +=== End-of-life ===
 +
 +^ **How it works** ^ **Types of parameters** ^ **Types of sources** ^
 +| - Definition of end-of-life scenarios (recycling, incineration, landfill) for the various category of materials (DEEE, metals, plastics, etc.) \\ - Sum of the impacts of each category | - Mass of material, type of material \\ - Repartition of waste between the various scenarios | - Scientific literature \\ - Public reports \\ - Databases \\ - Own research |
  
 ==== Product Envionnemental Footprint (PEF) method ==== ==== Product Envionnemental Footprint (PEF) method ====