naKnow Lib

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
# Manufacturing processes of Screens 

## LCD screen manufacturing
## OLED screen manufacturing

{{:capture_d_ecran_2026-04-01_144502.png?direct&600|}} 
manufacturing flow of OLED screen (undetailed)

There are multiple process flows depending on the type of OLED that is fabricated.The scheme below lists all the different types of OLED, and how it affects the process flow (([[https://patents.google.com/patent/US9472767B2/en?q=(OLED+manufacturing)&oq=OLED+manufacturing|Organic light-emitting device and method of manufacturing the same]], patent n°US9472767B2, Ja-Hyun Im, Ji-Hwan Yoon, Byung-Hoon Chun, Bum-Suk Kim, 2010)) (([[https://www.panoxdisplay.com/fr/solution/amoled-manufacturing-process-guide-2026/|Le guide complet de l'AMOLED Processus de fabrication]], Panox Display, 2026)) (([[https://www.wiley.com/en-es/Flat+Panel+Display+Manufacturing-p-9781119161363|Flat Panel Display Manufacturing]], Jun Souk, Shinji Morozumi, Fang-Chen Luo, Ion Bita, 2018)) (([[https://onlinelibrary.wiley.com/doi/book/10.1002/9781119187493|OLED Display Fundamentals and Applications]], Takatoshi Tsujimura, 2017)). Each process alternative is explained in the respective section of this page.


{{ :capture_d_ecran_2026-04-15_155646.png?direct&600 |}}


}
### 1. Substrate fabrication and preparation

((note 1)) (((note autre))
[( reférence )] 

### 2. TFT matrix (optional)

### 3. anode fabrication

### 4. HIL (hole injection layer) and HTL (hole transport layer) fabrications
### 5. EML (emission layer) fabrication 

##### deposition of organic emissive materials
There are different deposition methods depending on the organic emissive materials selected for the OLED. 
  * **vacuum thermal evaporation combined with an FMM** (Fine Metal Mask) - _for small sized displays_ (([[https://advanced.onlinelibrary.wiley.com/doi/epdf/10.1002/aelm.202500555|Vacuum Thermal Evaporation for OLEDs: Fundamentals, Optimization, and Implications for Perovskite LEDs]], C. Shen, Y. Hu, S. Zhou, et al., 2025)): This method is not selective, meaning the material is deposited everywhere in the equipment chamber : a FMM (Fine Metal Mask) is placed on top of the substrate to hide areas where no material should be deposited. The emissive layer of small display OLEDs consists of 3 emissive materials (respectively emitting red, blue and green light) that are placed side by side. Hence, there are actually 3 deposition steps using 3 different FMMs, one for each emissive material. 
  * **For larger sized display**, the use of an FMM is not appropriate due to a loss of resolution when the substrate size is increased. 

### 6. ETL (electron transport fabrication)

### 7. cathode fabrication
### 8. encapsulation

OLED devices are highly sensitive to moisture and oxygen. They require a water vapour transmission rate (WVTR) of less than 10<sup>–6</sup> g/m²/day. For this reason, the encapsulation process is crucial for maintaining a long lifetime. There are multiple encapsulation technologies: 

{{ ::classification_of_encapsulation_technologies.png?400 |}}

The use of these technologies depends on multiple parameters of the screen.
####Frit-seal

{{ :frit-sealed_structure.png?400 |}}

{{ ::frit-seal_process.png?400 |}}

This method can't be used for large or flexible screens.
####Face-seal 
{{ ::face-seal_structure.png?400 |}}

{{ ::face-seal_process.png?400 |}}

This method is used for large rigid screens.


####Thin-Film Encapsulation

{{ ::tfe_process.png?400 |}}
{{ ::tfe_structure.png?400 |}}

This method can be used for flexible screens.

Sources : ([https://www.wiley.com/en-es/Flat+Panel+Display+Manufacturing-p-9781119161363|Flat Panel Display Manufacturing])

### 9. assembly 

### 10. testings